Loa JBL Control 25-1L

Liên hệ để báo giá

5-¼” woofer with woven fiberglass cone
3/4” PEI diaphragm tweeter with fluid cooling
Contemporary, high-design appearance
Built-in InvisiBall® mounting hardware, plus available U-bracket
Weather resistant enclosure and transducers
Wide 100° x 100° coverage
100 Watt power handling (200 Watt program)
High fidelity sound character with broad frequency response of 60 Hz – 20 kHz.

JBL	CONTROL CONTRACTOR	CONTROL 25-1L	5¼” 2-WAY SURFACE-Mount Speaker, 8	China
JBL	CONTROL CONTRACTOR	CONTROL 25-1L-WH	5¼” 2-WAY SURFACE-Mount Speaker, 8	Taiwan

Mã: Control 25-1L Danh mục: Control Contractor 20 Series Brand: JBL

Mô tả

Loa JBL Control 25-1L là loa treo tường hai chiều 5-¼”, thiết bị âm thanh JBL này có đặc tính âm thanh phong phú, độ phủ rộng, độ phân tán nhất quán, kiểu lắp linh hoạt và kiểu dáng.

Thông số kỹ thuật JBL Control 25-1L

Frequency Range (-10dB)	60 Hz to 20 kHz
Frequency Response (±3 dB)	85Hz – 17 kHz
Power Rating	200 W Continuous Program (2 hrs) *Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor. Continuous Program Power is defined as 3 dB above the Continuou Pink Noise Rating and is a conservative expression of the system’s ability to handle normal speech and music program material.
Maximum Input Voltage	25.3 V RMS (2 hrs), 50.6 V peak
Maximum SPL (1m)	110 dB ave. Continuous Pink Noise (116 dB peak) *Calculated from sensitivity and power handling, exclusive of power compression.
Sensitivity	90 dB, 1W/1m (ave. 100 Hz – 10 kHz) *Half-space (on-wall) averaged 100 Hz – 10 kHz, 2.83V.
Coverage Angle	100°H x 100°V
Directivity Factor (Q)	6.04 (averaged 1kHz – 16kHz)
Directivity Index (DI)	7.6dB (averaged 1kHz – 16kHz)
Impedance	8 ohms
Crossover Type	2nd order low-pass, 3rd order high-pass
Recommended Protective High-Pass	60 Hz high-pass (24 dB/oct) *For protection against driving below resonant frequency and to keep transformer out of saturation.
Drivers	LF: 135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure. HF: 19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
Enclosure	High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
Grille	Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
Installation	InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
Outdoor Capability	IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
Input Connectors	Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
Safety Agency	ROHS-compliant
Colors	Black (RAL9004) or white (-WH, RAL9016)
Dimensions (H x W x D)	243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket. *In vertical orientation
Net Weight (each)	3.0 kg (6.7 lbs)
Shipping Weight	7.3 kg (16.0 lbs) for the pair-pack (for 2 speakers)
Included Accessories	InvisiBall™ wall-mounting system, 6 mm x 100 mm hex key
Optional Accessories	MTC-25UB-1 – Yolk-type U-bracket (&-WH)
Mounting Hardware	InvisiBall™ aimable wall-mounting system included. Optional U-bracket.