Loa JBL Control 25AV

Liên hệ để báo giá

Video shielded for use near video monitors.
Extremely smooth frequency response.
Stainless steel grill for harsh environments.
60 W transformer for 70 V or 100 V lines, with 8 ohms thru.
SonicGuard™ overload protection.
130 mm (5.25 in) polypropylene coated woofer, 10 mm
(.75 in) titanium coated horn-loaded tweeter.
Includes InvisiBall® mounting hardware and sealed input
panel cover.
Screw-down input terminals.
100° x 100° high frequency horn.

JBL	CONTROL CONTRACTOR	CONTROL 25AV	5.25″ 2-WAY W/HORN/AV VERSION	China
JBL	CONTROL CONTRACTOR	CONTROL 25AV-WH	5.25″ 2-WAY W/HORN/AV VERSION, WH	China

Mã: Control 25AV Danh mục: Control Contractor 20 Series Brand: JBL

Mô tả

Loa JBL Control 25AV là thiết bị âm thanh JBL được thiết kế cho cả trong nhà và ngoài trời, với khả năng phát âm thanh mượt mà và trung thực. Loa này có công suất âm thanh lên tới 150W, tần số thấp nhất là 80Hz và tần số cao nhất là 16kHz, giúp phù hợp cho nhiều ứng dụng âm thanh khác nhau.

Thông số kỹ thuật JBL Control 25AV

Frequency Range (-10dB)	33Hz – 19kHz
Frequency Response (±3 dB)	42Hz – 14kHz
Power Ratings	250 W (1000 W peak), 2 hrs. 200 W (800 W peak), 100 hrs.
Maximum SPL (1m)	116 dB continuous (123 dB peak)
Sensitivity	92 dB
Coverage Angle	110°H x110°V
Directivity Factor (Q)	5.7, averaged 500 Hz to 10 kHz
Directivity Index (DI)	7.3 dB, averaged 500 Hz to 10 kHz
Impedance	8 ohms
Crossover Type	2nd order low-pass, 2nd order high-pass, plus conjugate shaping circuitry.
Transformer Taps	70V: 150W, 75W, 38W, 19W 100V: 150W, 75W, 38W Insertion Loss: <0.65 dB at any tap setting Thru Setting: 8Ω nominal
Recommended High-Pass	Protective 40 Hz high-pass (24 dB/oct) for any transformer tap and for 8Ω operation
Drivers	LF: 250 mm (10 in) woven-fiberglass cone with pure butyl rubber surround, 52 mm (2 in) voice coil on high-temperature fiberglass voice coil former, optimized cone geometry, linear suspension spider, FEA-optimized motor construction, aluminum ring on pole piece. HF: JBL 2414H-C compression driver with 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, JBL-patented design, fluid-cooled.
Enclosure	High impact Polystyrene (HIPS) with 10% glass fill plus patent-pending internal 5 mm foamed polyurethane secondary mold for additional cabinet density.
Grille	Zinc-plated and thermoset-composite coated steel, WeatherMax™ multi-layer foam with tight-weave mesh vapor barrier.
Mounting hardware	InvisiBall wall-mounting system included. Ten 6 mm attachment points on cabinet for suspending or for optional U-bracket. One 6 mm secondary safety attachment point (for forged shoulder steel eyebolt, not included) on back panel.
Outdoor Capability	IP-55 per IEC529. Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray. Optional MTC-30MK marine-kit grille increases longevity in highly corrosive environments.
Input Connectors	Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2).
Safety Agency	Transformer is listed per UL1876
Colors	Black (RAL9004) or white (-WH, RAL9003)
Dimensions (H x W x D)	593 x 372 x 345 mm (23.3 x 14.6 x 13.5 in)
Net Weight (each)	18.8 kg (41.5lb)
Shipping Weight (ea)	22.0 kg (48.5 lb)
Included Accessories	1 pc MTC-PC2 input panel cover, InvisiBall wall-mounting system, 6 mm x 305 mm InvisiBall hex wrench.
Optional Accessories	MTC-30MK Marine-Kit Grille in black or white (-WH), consisting of grille and protective covers for baffle screws. MTC-30CM (&-WH) Ceiling-Mount Adapter for installing speaker down from the ceiling. MTC-30UB (&-WH) U-Bracket