Loa JBL Control 29AV-1

Liên hệ để báo giá

Extended bandwidth, extremely smooth
frequency response.
110° x 85° HF coverage, rotatable horn.
110 W transformer for 70 V or 100 V
lines, with 8 ohm thru.
SonicGuard™ overload protection.
200 mm (8 in) Kevlar cone woofer,
25 mm (1 in) titanium
diaphragm compression driver.
Includes InvisiBall™ mounting hardware, plus ten 6 mm
attachment points for suspension and
optional U-bracket.
Sealed input panel cover and screwdown input terminals.

Mã: Control 29AV-1 Danh mục: Control Contractor 20 Series Brand: JBL

Mô tả

Loa Control 29av-1 là mẫu loa JBL chuyên nghiệp có thẻ lắp đặt trong nhà hoặc ngoài trời. Loa treo tường JBL Control 29AV-1 thiết kế với kiểu dáng sang trọng nhất, kết hợp công nghệ mới vào sản suất sản phẩm.

Thông số kỹ thuật JBL Control 29AV-1

Frequency Range	37 Hz –18 kHz (-10 dB)
Power Capacity	300 W Continuous Program Power; 150 W Continuous Pink Noise
Transformer Taps	70 V: 110 W, 55 W, 28 W & 14 W 100 V: 110 W, 55 W, & 28 W, Thru Position: 8 ohms nominal
Frequency Response	45 Hz – 18 kHz ( ± 3 dB)
Maximum SPL (1m)	Short-Term: 120 dB; Long-Term: 114 dB
Nominal Sensitivity	90 dB (2.83V / 1m)
Coverage Angle	110°H x 85°V, Rotatable
Directivity Factor (Q)	7.2 dB, averaged 500 Hz to 16 kHz
Directivity Index (DI)	8.6 dB, averaged 500 Hz to 16 kHz
Impedance	8 ohms
Minimum Impedance	6.3 ohms @ 230 Hz
Crossover Network	3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
Drivers	LF: 200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former HF: 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
Enclosure	High impact polystyrene
Grille	Thermoset composite coated steel, WeatherMax multi-layer foam
Overload Protection	Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.
Outdoor Capability	IEC 529 IP-X4 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
Input Connectors	Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
Safety Agency	Transformer is listed per UL1876
Colors	Black or white (-WH)
Dimensions (H x W x D)	520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)
Net Weight (each)	12.2 kg (26.8 lb.)
Shipping Weight (ea)	14.0 kg (30.8 lb.)
Included Accessories	1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench.
Optional Accessories	MTC-29CM to install speaker down from the ceiling MTC-29UB U-bracket
Mounting Hardware	InvisiBall™ aimable wall-mounting system included. Optional U-bracket.