Loa JBL VLA-C2100

Liên hệ để báo giá

Compact line array module optimized for permanent install applications
Advanced technology component transducers for low weight and high output
Outdoor IP55 rated enclosure for protection from dust and water
Comprehensive rigging points for creating a line array configuration
Fiberglass box construction and weatherized components
Can be bi-amplified for maximum SPL, or fed passively for reduced amplification costs
100° horizontal coverage pattern

Mã sản phẩm: VLA-C2100 Danh mục: VLA Compact Series Thẻ: jbl by harman, Loa dàn, loa dàn cong, loa hội trường, Loa JBL, loa sân vận động, loa toàn dải Thương hiệu: JBL

Mô tả

VLA-C2100 là một mô-đun mảng dòng nhỏ gọn, được tối ưu hóa cho các ứng dụng cài đặt cố định. Thiết bị âm thanh JBL này sử dụng các thành phần công nghệ tiên tiến đã được JBL kiểm chứng, bao gồm bộ phận tần số cao tích hợp loa kèn để đạt độ nhạy tối đa và kiểm soát mẫu tối ưu. Điều này cho thấy thiết kế tập trung vào hiệu suất và khả năng kiểm soát âm thanh trong các môi trường cài đặt chuyên nghiệp.

Frequency Range (-10dB)	86 Hz – 18 kHz
Frequency Response (±3 dB)	109 Hz – 15.3 kHz
Full Range	800 W Continuous Pink Noise (3200 W peak), 2 hrs 400 W Continuous Pink Noise (1600W peak), 100 hrs
Bi-amp LF	800 W Continuous Pink Noise (3200 W peak), 2 hrs 400 W Continuous Pink Noise (1600W peak), 100 hrs
Bi-amp HF	150 W Continuous Pink Noise (600 W peak), 2 hrs 50 W Continuous Pink Noise (200 W peak), 100 hrs
Full-Range	80 V Rms (2 hrs), 160 V peak
Maximum SPL (1m)	131 dB Cont. Ave (2 hrs), 137 dB Peak
Coverage Pattern (-6 dB)	Horizontal: 100° (+5°/-15°, 1.5 kHz to 15 kHz) Vertical: Varies with array size and configuration
Amplifiers	Crown DCi Family with DSP on-boardRecommended: Crown DCi 2 \| 1250N Crown DCi 4 \| 1250N/ND/DA Crown DCi 2 \| 2400N Crown DCi 4 \| 2400N
LF Driver	2 x 2261FF, 254 mm (10 in) diameter, each with two 76 mm (3 in) diameter voice coils, Neodymium Differential Drive®, Direct Cooled™
HF Driver	3 x 2415K, D2 Dual Diaphragm Dual Voice Coil Compression Drivers, each with two 38 mm (1.5 in) dia. Voice Coils; 21 mm (0.8 in) exit
Enclosure Material	Fiberglass shell, gelcoat finish, with 18 mm Birch plywood internal bracing.
Grille	Powder coated 14 gauge hex-perforated steel with zinc under-coating, backed with acoustically transparent cloth and hydrophobic screen.
Inter-Enclosure Angles	VLA-C2100 to VLA-C2100: 2.4°, 3.8°, 6.0°, 9.5°, 15° using VLA-C2100 Bracket Plate (included with VLA-C2100)VLA-C2100 to VLA-C265 (either model on top/bottom): 1.9°, 3.0° using VLA-C2100 Bracket Plate (included with VLA-C2100) and 4.7°, 7.5°, 11.9° using VLA-C265 Bracket Plate (included with VLA-C265)VLA-C2100 below VLA-C125S Subwoofer (VLA-C2100 cannot be connected above C125S): 0°, 7.5° using VLA-C125S Bracket Plate (included with VLA-C125S)
Environmental	IP-55 rating per IEC529 (dust protected and protected against jets of water)
Terminals	CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs. Touch-proof covers
Colors	-GR: Gray (similar to Pantone 420C), -BK: Black
Dimensions (H x W x D)	381 x 848 x 460 mm (15.0 x 33.4 x 18.1 in)
Net Weight (each)	37.7 kg (83 lbs)
Shipping Weight (ea)	44.0 kg (97 lbs)
Included Accessories	2 x VLA-C2100 Bracket Plates 8 pcs. M10 x 35 mm stainless steel bolts (1.5mm pitch, 6 mm hexdrive) for attaching Bracket Plates 2 pcs. Plastic Trim Cover Panels for Bracket Plates, each attaches via 4 pcs (8 total) 3-32 x ½” trusshead, phillips-drive, stainless steel bolts
Optional Accessories	VLA-C-SB2 (JBL-VLACSB2BK) Suspension Bracket Kit

Loa JBL VLA-C2100

Sản phẩm tương tự

Đăng nhập