JBL VLA601i

Liên hệ để báo giá

Line array module optimized for permanent install applications.
Standard version features 3 HF drivers, 2MFdrivers, & 2 LF drivers
Advanced technology component transducers for low weight and high output.
Comprehensive rigging points for creating a line array configuration.
Rugged DuraFlex™ exterior finish and weatherized components. JBL’s WRC or WRX weather protections also available.

SKU: VLA601i Danh mục: VLAi Series Thương hiệu: JBL

Mô tả

JBL VLA601i là một sản phẩm loa ba đường tiếng, cung cấp khả năng tăng cường âm thanh với tầm xa vượt trội so với các thiết kế loa truyền thống. Loa JBL này sử dụng các linh kiện JBL đã được chứng minh với công nghệ Differential Drive®. Phiên bản tiêu chuẩn bao gồm ba loa treble, hai loa trung và hai loa trầm, với hai loa trầm 15 inch (LF).

Frequency Range (-10dB)	41 – 20kHz
Frequency Response (-6 dB)	45 – 19.5kHz
Frequency Response (-3 dB)	50 – 19.2kHz
Horizontal Coverage	60° nominal (500 Hz – 16 kHz)
Vertical Coverage	Varies with array size and configuration.
System Power Ratings	LF: 1000W Continuous (IEC /100 hour) MF: 400W Continuous (IEC /100 hour) HF: 160W Continuous (IEC /100 hour)
Maximum SPL (1m)	147.2dB (Preset: Flat)
LF Driver	2 x JBL 2265H, 15in diameter, dual 3in diameter voice coil, Neodymium Differential Drive
Nominal Impedance	4 ohms
Sensitivity (2.83V @ 1m)	LF: 99dB/96dB MF: 107dB/104dB HF: 108db/111dB
Mid-Frequency Driver	2 x JBL 2169H, 8in diameter, dual 3in diameter voice coil, Neodymium Differential Drive
High-Frequency Driver	3 x JBL 2432H, 1.5in exit compression driver, 3in diameter voice coil, Neodymium Magnet
Enclosure	18mm and 16mm, Exterior grade Baltic birch plywood, DuraFlexTM finish or optional Fiberglass
Suspension Attachments	16 points (4 each top bottom & rear, 2 each side), M10 threaded hardware (eyebolts NOT included).
Finish	Black DuraFlexTM (STD), Gray DuraFlexTM (WRC), Gray Fiberglass (WRX), optional colors; Stainless Steel Hardware (WRC/WRX)
Optional Weather Resistant Versions	WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or rapid changes in temperatures. See WRC/WRX configuration sheet for details.
Grille	Powder coated 14 gauge perforated steel, zinc-phosphate dipped, acoustically transparent foam backing (grill cloth backing on white units) (16 gauge stainless steel on WR versions)
Input Connectors	Barrier Strip for #6 spade lug, including gland nut and cover plate
Environmental	Mil-Std 810; IPx3 per IEC529. For higher environmental ratings, use WRC or WRX.
Dimensions (H x W x D)	528.3mm x 1346.2mm x 767.1mm (20.8in x 53.0in x 30.2in)
Net Weight	100.7kg (222.0lbs)

JBL VLA601i

Sản phẩm tương tự

Đăng nhập