VHD5.0 là một loa ba đường tiếng, đảm nhiệm dải tần từ trầm thấp, trung trầm đến cao, với dải tần hoạt động từ 45Hz đến 20kHz. Hệ thống bao gồm tám loa 10 inch cho dải trung trầm (low-mid) kiểu front-loaded, sáu loa 8 inch cho dải trung (mid-range) kiểu horn-loaded, và ba củ nén 3 inch NVPD (Nitrate Vapour Particle Deposition) màng titanium, gắn trên họng kèn được thiết kế đặc biệt với manifold horn assembly và summing waveguide. Với khả năng hoạt động toàn dải xuống tới 45Hz, loa VHD5.0 thường được cắt tần ở khoảng 70Hz để phối hợp với mô-đun subwoofer chủ động VHD4.21
KV2 Audio VHD5.0 Mid Hi Module
Liên hệ để báo giá
- Professional Baltic birch construction with wear-resistant polymer coating
- Cut away down angle for correct positioning when flown underneath VHD2.0 cabinet
- Four pieces of fly-track (two per side)
- Very High Definition audio reproduction
- 134dB sustained output, 137dB peak
- Controlled wide dispersion 110° x 40° Mid/High horn with a flat response to 180°
- Revolutionary 3″ (76 mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, exceptionally low distortion and extended frequency response
- 8″ Trans-Coil midrange driver, with a 3″ (76 mm) voice coil and neodymium magnet for increased control and output with reduced distortion and weight. Horn loaded 12″ mid-bass driver with 3″ (76 mm) inside/outside, epoxy baked, high temperature voice coil assembly and neodymium magnetic structure
- Three way active requirement – 1000W from the VHD 2000 providing 600W for the 12″ Low Mid, 300W for the 8″ Midrange and 100W for the High Frequency
- Proprietary side handle design (3) for simplified handling and carrying
- High impact low friction feet, allowing lock- in to other VHD cabinets and easy cabinet movement
- Front locking aluminium VHD wheel boards with wraparound hardwood bumpers
- Weather proofing option and special paint finishes available on request


