Loa JBL AM5215/66
Liên hệ để báo giá
- 60° x 60° Coverage
- 265H-1 Differential Drive® Low-Frequency Driver
- 2408H-1 High-Frequency Compression Driver
- Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion
- Rotatable waveguide for vertical or horizontal orientation
- Bi-Amp/Passive Switchable
- Bi-amp and Passive Mode FIR Tuning Set Delivers Optimized Frequency & Phase Response, Coverage Consistency, and Sound Quality
- Available in Black, White and WRC/WRX weather resistant finishes
Applications
- Performing Arts Facilities
- Theatrical Sound Design
- Auditoriums
- Worship Facilities
- Live Clubs
- Dance Clubs
- Sports Facilities
- Themed Entertainment Venues
To improve reliability in weather conditions and reduce water ingress, cabinet dimensions of WRC & WRX models may be different than standard model dimensions. Contact [email protected] for drawings and/or dimension information of WRC & WRX models.)
| JBL | AE SERIES | AM5215/66 | Two-way full range loudspeaker | Mexico |
| JBL | AE SERIES | AM5215/66-WH | Two-way full range loudspeaker (white) | Mexico |
2-Way Loudspeaker System with 1 x 15″ LF
The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability.
| Frequency Range (-10dB) | 35 Hz – 20 kHz |
| Frequency Response (±3 dB) | 41 Hz – 20 kHz |
| Coverage Pattern | /64: 60° x 40°/66: 60° x 60°/95: 90° x 50° /26: 120° x 60° |
| Directivity Factor (Q) | 14.5 |
| Directivity Index (DI) | 11.6 dB |
| Crossover Modes | Bi-amp/Passive switchable |
| Passive Crossover Frequency | 2 kHz |
| Transducer Power Rating (AES) | LF: 500 W (2000 W peak), 2 hrs350 W (1400 W peak), 100 hrsHF: 40 W (160 W peak), 2 hrs |
| System Power Rating | Passive mode: 350 W (1400 W peak), 100 hrs |
| Maximum SPL (1m) | Bi-amp mode:LF: 125 dB-SPL cont avgHF: 131 dB-SPL cont avg. |
| System Sensitivity (1w @ 1m) | Passive mode: 98 dB SPL |
| LF Driver | 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil |
| Nominal Impedance | 8 ohms |
| Sensitivity (1W @ 1m, within operational band) | 99 dB SPL |
| HF Driver | JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil |
| Sensitivity | 115 dB SPL |
| Waveguide | PT-H66HF-1 |
| Enclosure | Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood |
| Suspension Attachment | 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware |
| Finish | Black DuraFlex™ finish. White available upon request. |
| Grille | Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. |
| Input Connector | NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. |
| Environmental | Mil-Std 810; IP-x3 per IEC529. |
| Dimensions (H x W x D in vertical orientation) | 783 x 422 x 504 mm(30.8 x 16.6 x 19.85 in) |
| Net Weight (each) | 25.0 kg (55 lb) |
| Optional Accessories | M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 |
| System Power Rating | Passive mode: 350 W (1400 W peak), 100 hrs (IEC rated) |
| Nominal LF Driver Impedance | 8 ohms |
| Nominal HF Driver Impedance | 8 ohms |
Sản phẩm tương tự
Liên hệ để báo giá
Liên hệ để báo giá
Liên hệ để báo giá
Liên hệ để báo giá
Âm thanh
Liên hệ để báo giá
Liên hệ để báo giá
Liên hệ để báo giá
Liên hệ để báo giá