Bộ khuếch đại Electro Voice PA4150L 150W
Liên hệ để báo giá
- Flexible multi-channel power for installation
- Ideal for sound reinforcement, paging, and life safety
- 150 W per channel into 4 Ω
- Bridged mode for dual 315 W outputs into 8 Ω
- Compact 2 RU design
- Stepped rear-panel level attenuation
- Selectable 50 Hz or 300 Hz high-pass filter
- Thermal protection, peak limiting, turn-on delay
- Phoenix-type inputs and outputs
- Three-stage front-to-rear fans
- Integrated rack ears for direct mounting
Thông số kỹ thuật Electro Voice PA4150L 150W
| Height | 3.46″ (88mm) |
| Width | 19.02″ (483mm) |
| Depth | 15.98″ (406mm) |
| Weight Net | 39.68lbs (18kg) |
| Frequency Response (-3 dB) | < 10Hz – 40kHz (-1dB, ref. 1kHz) |
| Crosstalk | < < -75dB (ref. 1kHz, @ 10% rated output power) |
| Rated output power (*rated load) THD < 1%, 1kHz | 160/100W (4ω/8ω) |
| Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω | 150Watts |
| Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz | 150/75W (4ω/8ω) |
| Continuous Rated Power (1 kHz, THD 1%) 2Ω | 160Watts |
| Channels | 4 |
| Continuous Rated Power (1 kHz, THD 1%) 8Ω | 100Watts |
| Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω | 75Watts |
| Total Harmonic Distortion | < 0.1% |
| Slew Rate | 16V/µs |
| Intermodulation Distortion (SMPTE) | < 0.1% |
| DIM 30 | < 0.1% |
| Signal-to-Noise Ratio (A-weighted) | 101dB |
| Input Impedance (Balanced) | > 20kΩ |
| Input Sensitivity | 0 dBu (775mV) (@ rated output power or voltage, 1kHz) |
| Number of Channels | 4 |
| Network Control (IRIS-Net) | No |
| Amplifier Gain | 30dB |
| Continuous Rated Power (1 kHz, THD 1%) 4Ω | 160Watts |
| Impedance | 4/8Ω |
Sản phẩm tương tự
PA Electro Voice
Liên hệ để báo giá
PA Electro Voice
Liên hệ để báo giá
PA Electro Voice
Liên hệ để báo giá
PA Electro Voice
Liên hệ để báo giá