Meyer Sound 750 LFC

Liên hệ để báo giá

Compact cabinet with small footprint and extraordinary power-to-size ratio
High peak power output with extremely low distortion
Exceptional linearity, transient reproduction, and low-frequency clarity
Self-powered design for simplified setup and increased reliability
Stackable and flyable in regular and cardioid arrays with splay options
Integral pole-mount receptacle to facilitate pairing with LINA or ULTRA Series loudspeakers

Mã sản phẩm: 750 LFC Danh mục: Meyer Sound Thương hiệu: Meyer Sound

Mô tả
Đánh giá (0)

750 LFC thiết bị loa Meyer Sound là loa siêu trầm nhỏ gọn phù hợp không gian gia đình của bạn.

Thông số kỹ thuật

ACOUSTICAL
Operating Frequency Range²	35 Hz – 125 Hz
Frequency Response³	37 Hz – 110 Hz ±4 dB
Phase Response	43 Hz – 110 Hz ±30°
Linear Peak SPL⁴	130.5 dB with crest factor >9 dB (M-noise), 130.5 dB (pink noise), 132 dB (B-noise)
COVERAGE
	360° (single unit); varies with number of units and configuration
TRANSDUCERS
Low Frequency	One 15-inch, dual-coil, long-excursion cone driver; 2 Ω nominal impedance
AUDIO INPUT
Type	Differential, electronically balanced
Maximum Common Mode Range	±15 V DC, clamped to earth for voltage transient protection
Connectors	XLR 3-pin female with male loop. Optional 5-pin connectors to accommodate both balanced audio and RMS signals
Input Impedance	10 kΩ differential between pins 2 and 3
Wiring⁵	Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamped network to provide virtual ground lift at audio frequencies Pin 2: Signal (+) Pin 3: Signal (–) Pin 4: RMS Pin 5: RMS Case: Earth ground and chassis
Nominal Input Sensitivity	6.0 dBV (2.0 V rms) continuous is typically the onset of limiting for noise and music
Input Level	Audio source must be capable of producing +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
AMPLIFIER
Type	2-channel, open-loop, class D
Total Output Power⁶	3100 W peak
THD, IM, TIM	< 0.02%
Cooling	Convection
AC POWER
Connectors	powerCON 20 input with loop output
Automatic Voltage Selection	90–265 V AC; 50–60 Hz
Safety Agency Rated Voltage Range	100–240 V AC, 50–60 Hz
Turn-on and Turn-off points	Turn-on: 90 V AC; Turn-off: none; internal fuse protection above 265 V AC
CURRENT DRAW
Idle	0.39 A rms (115 V AC), 0.38 A rms (230 V AC), 0.42 A rms (100 V AC)
Maximum Long-Term Continuous	5.3 A rms (115 V AC), 2.7 A rms (230 V AC), 6.2 A rms (100 V AC)
Burst (<1 sec)⁷	9.2 A rms (115 V AC), 4.4 A rms (230 V AC), 10.7 A rms (100 V AC)
Maximum Instantaneous Peak	15.3 A peak (115 V AC), 7.8 A peak (230 V AC), 18 A peak (100 V AC)
Inrush Current	< 20.0 A peak
RMS NETWORK (OPTIONAL)
	Two-conductor, twisted-pair network, capable of reporting all operating parameters of amplifiers to system operator’s host computer.
PHYSICAL
Dimensions without Rigging	W: 21.80 in (554 mm) x H: 20.30 in (515 mm) x D: 20.88 in (530 mm)
Dimensions with Rigging	W: 21.55 in (547 mm) x H: 20.43 in (519 mm) x D: 20.88 in (530 mm)
Weight without Rigging	89 lbs (40.3 kg)
Weight with Rigging	105 lbs (47.6 kg)
Enclosure	Premium multi-ply birch with slightly textured black finish
Protective Grille	Powder-coated, hex-stamped steel with acoustical black mesh
Rigging	Optional MRK-750 rigging kit with end frames and captive GuideALinks secured with 0.25 in x 0.53 in quick release pins that allow 0°, 1.5°, 3.25°, or 4.75° splay angles; detachable side handles. Rigging allows ground-stacked, flown, and cardioid configurations
Pole Mount	U.S. version: 1.5 in (38 mm) E.U. version: 1.375 in (35 mm and M20 thread at the bottom)