Loa JBL PD6212/66

Liên hệ để báo giá

300 mm (12 in) horn-loaded LF and largeformat HF driver – high sensitivity design with high continuous
SPL capability.
Large PT™ Progressive Transition™ waveguides provide broad band pattern control, low distortion at high SPL levels and smooth frequency response.
Rotatable low and high frequency waveguide allow either horizontal or vertical cabinet orientation.
Sophisticated, steep-slope passive crossover network with switchable bi-amp/passive crossover modes.

JBL	PRECISION DIRECTIVIT	PD6212/66	12″ two-way horn-loaded loudspeaker	Mexico
JBL	PRECISION DIRECTIVIT	PD6212/66-WH	12″ two-way horn-loaded loudspeaker (	Mexico

Mã: PD6212/66 Danh mục: Loa JBL, PD6000 Series Brand: JBL

Mô tả

Thông số kỹ thuật JBL PD6212/66

Frequency Range (-10dB)	80 Hz to 18 kHz
Frequency Response (±3 dB)	90 Hz to 16 kHz
Coverage Pattern	/43: 40° x 30°/64: 60° x 40°/66: 60° x 60°/95: 90° x 50°
Crossover Modes	Bi-amp / Passive switchable
Passive Crossover	6th order (36 dB/oct) Linkwitz-Riley HP & LP, 850 Hz
Transducer Power Rating (AES)	LF: 400 W (1600 W peak), 2 hrs. 300 W (1200 W peak), 100 hrs HF: 75 W (300 W peak), 2 hrs
System Power Rating	Passive Mode: 300 W (1200 W peak), 100 hrs
Maximum SPL (1m)	LF: 137 dB-SPL HF: 135 dB SPL (141 dB peak)Passive Mode: 134 dB SPL (140 dB peak)
System Sensitivity (1w @ 1m)	Passive Mode: 107 dB-SPL
LF Driver	M222-8A 300 mm (12 in) driver with 75 mm (3 in) voice coil
HF Driver	2453H, 38 mm (1.5 in) exit compression driver with 100 mm (4 in) voice coil
Nominal Impedance	8 ohms
Enclosure	Trapezoidal with 12.5 degree side angles, 16 mm (5/8 in) exterior
Suspension Attachment	20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware
Finish	Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions	WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements.
Grille	Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam
Input Connectors	Neutrik Speakon® NL4, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop through.
Environmental	Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical orientation)	991 x 673 x 897 mm
Net Weight (each)	60.3 kg (133 lb)
Optional Accessories	229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.
Nominal LF Driver Impedance	8 ohms
Nominal HF Driver Impedance	8 ohms